Australian Standards for the Export of Livestock 3.4
STANDARD 1 | 
Sourcing and preparation of livestock for export by sea

1.2.1 - Buffalo must have been weaned at least 14 days prior to sourcing for export.

1.2.2 - Buffalo must not be sourced for export unless they have become conditioned to being handled and to eating and drinking from troughs for a minimum of 21 days.

1.2.3 - Buffalo sourced for export must have an individual liveweight of 200kg to 500kg (inclusive). Animals outside of these weights must not be sourced for export or exported, unless otherwise provided:

  1. for buffalo less than 200kg, in a light buffalo management plan approved in writing by the department, and buffalo must have an individual liveweight of 200kg or more at the time of export; or
  2. for buffalo more than 500kg, in a heavy buffalo management plan approved in writing by the department.

1.2.4 - Buffalo must not be sourced for export or exported unless they have been assessed by a competent stock handler against the buffalo body condition scoring in Table 1a and have a body condition score of 2 to 4 (inclusive) (on a scale of 1 to 5).

Table 1a Buffalo body condition score

Score

Description

P8 fat mm thickness

Loin surface

Illustration of vertical section of the loin region between spinous and traverse processes

1

Emaciated; very weak – extreme muscle wastage. All bones highly visible. Skin 'draped' over skeleton. Unsteady gait.

0

Severely concave

Image

2

Lean; short ribs visible, hook and pin bones still prominent. Can easily count all ribs. Some muscle depletion. No subcutaneous fat visible or palpable.

0

Moderately concave

Image

3

Store; (average) good muscle definition, with fat starting to be deposited, rib outlines disappearing, hook and pin bones still defined.

1 to 4

Level, even slope

Image

4

Prime; quite even and smooth over whole backline. Muscling becoming more convex due to fat deposition.

5 to 35

Moderately convex

Image

5

Overfat; usually only mature cows can achieve this condition. Bulbous fat deposits both sides of tail head. Pin and hook bones not discernible.

>36

Severely convex, crease/dip along spine

Image

Source: NT Buffalo Industry Council Inc.

1.2.5 - Female buffalo sourced for export as feeder or slaughter animals must either be not detectably pregnant or be spayed according to the following criteria:

  1. pregnancy testing must be performed by a registered veterinarian or competent pregnancy tester within 30 days prior to export by either
    1. manual palpation
    2. an approved blood test if performed by a registered veterinarian
    3. ultrasound if performed by a registered veterinarian, or
  2. if spayed, the spay procedure must occur not less than 30 days prior to export if using the Willis dropped ovary technique or not less than 280 days prior to export if using any other technique, and
  3. animals must be accompanied by a spay declaration, pregnancy declaration or pregnancy certification.

1.2.6 - Female buffalo sourced for export as breeder animals must be no more than 220 days pregnant at the scheduled date of discharge in the importing country and must be pregnancy tested within 30 days prior to export. Pregnancy testing must be performed by a registered veterinarian according to the following criteria:

  1. using an approved blood test and if the test is positive undergo further testing as per b) and c), or
  2. if the voyage is less than 10 voyage days, be pregnancy tested using manual palpation or ultrasound, or
  3. if the voyage is 10 voyage days or more, be pregnancy tested by a PREGCHECK-accredited veterinarian using manual palpation or ultrasound, and
  4. animals must be accompanied by pregnancy certification.

1.2.7 - Buffalo with horns must only be sourced for export or exported if they have:

  1. blunt horns; and
  2. horns that are less than the spread of the ears, unless otherwise provided in a long-horned livestock management plan approved in writing by the department.