Australian Standards for the Export of Livestock 3.4
STANDARD 6 | 
Air transport of livestock

6.5.1 - Cattle must have been weaned at least 14 days prior to sourcing for export, unless the exporter has approval under Standard 6.1.17 to export livestock with young at foot.

6.5.2 - Cattle sourced for export must have an individual liveweight of between 150kg and 650kg (inclusive). Animals outside these weights must not be sourced for export or exported, unless:

  1. for cattle less than 150kg, the exporter has approval under Standard 6.1.20 to export miniature or light weight breed livestock; or
  2. for cattle more than 650kg, otherwise provided in a heavy cattle management plan approved in writing by the department.

6.5.3 - Cattle must not be sourced for export or exported unless they have been assessed by a competent stock handler against the non-dairy breed cattle body condition scoring in Table 29 or dairy breed cattle body condition scoring in Figure 5 and have a body condition score of:

  1. for non-dairy breed cattle, 2 or more but less than 5 (on a scale of 0 to 5); and
  2. for dairy breed cattle, 3.5 or more but less than 5.5 (on a scale of 1 to 8).

Table 29 Non-dairy breed cattle body condition score

Score

Description

0

Severely emaciated

1

The individual bones are sharp to the touch, with no fat at the head of the tail. Hip bones and ribs are prominent.

2

The individual bones can be felt easily, but feel rounded rather than sharp. There is some tissue cover around the tail head. Individual ribs are no longer visually obvious.

3

The short ribs can be felt only with firm thumb pressure. Areas either side of the tail head have fat cover that can be felt easily.

4

The ribs cannot be felt and fat cover around the tail head is easily seen as slight mounds, soft to touch. Folds of fat are beginning to develop over the ribs and thighs.

5

The bone structure of the animal is no longer noticeable and the tail head is almost completely buried in fatty tissue.

Figure 4 Visual aid for assisting with body condition scoring of non-dairy breed cattle

Image

Source: Cattle Council of Australia

Figure 5 Dairy breed cattle body condition score (diagram shows 3 to 6 on scale of 1 to 8)

Image

Source: DEPI (Vic)

6.5.4 - Female cattle sourced for export as feeder or slaughter animals must either be not detectably pregnant or be spayed according to the following criteria:

  1. pregnancy testing must be performed by a registered veterinarian within 30 days prior to export by either
    1. manual palpation
    2. an approved blood test
    3. ultrasound, and
  2. if spayed, the spay procedure must occur not less than 30 days prior to export if using the Willis dropped ovary technique or not less than 280 days prior to export if using any other technique, and
  3. animals must be accompanied by a spay declaration or pregnancy certification.

6.5.5 - Female cattle sourced for export as breeder animals must be no more than 190 days pregnant at the scheduled date of export, unless otherwise provided for in a last third of pregnancy management plan approved in writing by the department. Pregnancy testing must be performed by a registered veterinarian according to the following criteria:

  1. using an approved blood test and if the test result is positive, undergo further testing as per b), or
  2. by manual palpation or ultrasound, and
  3. animals must be accompanied by pregnancy certification
  4. for not detectably pregnant cattle, the pregnancy certification is valid for 60 days from the date of the procedure.

6.5.6 - Unless otherwise provided in a long-horned livestock management plan approved in writing by the department, cattle with horns must only be sourced for export or exported if the:

  1. solid non-vascular tip has been removed to a diameter of 3cm (or less if the horn vasculature does not allow) and horns have a blunt horn end; and
  2. horns are no longer than 12cm in length at the time of export.

6.5.7 - Cattle must be penned in accordance with the minimum pen space allocation shown in Table 30. For weights between those shown in Table 30, the minimum pen area per head must be calculated by linear interpolation.

6.5.8 - When calculating pen space allocation, the pen area per head must be increased by 10% for cattle with horns.

Table 30 Minimum pen space allocation for cattle exported by air

Liveweight (kg)

Minimum pen area (m2/head)

150

0.54

160

0.56

170

0.58

180

0.60

190

0.62

200

0.64

210

0.66

220

0.68

230

0.70

240

0.72

250

0.74

260

0.76

270

0.78

280

0.80

290

0.82

300

0.84

310

0.87

320

0.89

330

0.91

340

0.93

350

0.95

360

0.98

370

1.00

380

1.02

390

1.04

400

1.06

410

1.08

420

1.10

430

1.12

440

1.15

450

1.17

460

1.19

470

1.21

480

1.23

490

1.25

500

1.27

510

1.29

520

1.31

530

1.34

540

1.36

550

1.38

560

1.40

570

1.42

580

1.44

590

1.46

600

1.48

610

1.50

620

1.53

630

1.55

640

1.57

650

1.59